硬質合金銑刀
SOLID CARBIDE
SPIRAL BITS
solid wood door without it>>>費時 _cc781905-5cde -3194-bb3b-136bad5cf58d_
_cc781905-5cde-3194-bb3b-136bad5 furniture without it>>>unhappy
Carbide helical milling cutters can be used for all straight-cut milling cutters, such as trimming, shaping and grooving. Compared with the traditional straight-cut milling cutter, the cutting edge of the helical milling cutter can always keep in contact with the workpiece, and the force on the workpiece and the milling cutter is always consistent, so as to achieve a more effective cutting effect and faster cutting. cutting speed. Helical milling cutters cut more like "peeling" than "chiseling". Carbide helical milling cutters achieve the best results in straight cuts with high-speed feeds under firm grip; traditional straight-cut milling cutters are more efficient in low-speed feeds and cuts that often require turning .
Carbide two-blade end mill
It is applied to the cutting of solid wood and spliced wood, with good chip removal effect and smoother processing effect.
Uses: Suitable for solid wood, mixed wood, hard surface wood, plastic.
Carbide threeBlade thickness milling cutter
The three-blade design can produce a relatively flat surface processing effect during processing, and is used for trimming and grooving.
Application: Suitable for processing of synthetic board, glass fiber and synthetic resin.
CarbideTwo-blade rough milling cutter
It is suitable for use with small-horsepower CNC tools or when it cannot be used for faster feed rates. This cutting process provides good chip breaking.
Uses: Suitable for solid wood, splicing wood, etc.
Carbide threeBlade thickness milling cutter
Roughing surface for fast cutting with excellent chip evacuation.
Uses: Suitable for solid wood, spliced wood, soft and hard plastics.
CarbideTwo-edge milling cutter
This series of tools has excellent fracture function in the process of machining and cutting, which can reduce friction and cutting resistance, and is suitable for rough milling and fine machining.
Uses: solid wood, mixed wood.
Carbide threeBlade thickness milling cutter
High stability in the finishing environment of fast machining.
Uses: solid wood, mixed wood.
Carbide compound spiral milling cutter
The design of this tool combines the composite spiral cutting design of top-rotating cutting and bottom-rotating cutting, which can simultaneously cut thin wood or solid wood with double-sided veneer.
Application: Double-sided veneer, plywood, solid wood, mixed board.
Carbide door panel, door lock special knife
This series of products are suitable for applications such as door locks, key holes and five-axis machining centers for solid wood door panels and composite door panels. During the entire groove milling process, the effect of removing wood chips is excellent, and there is no risk of remaining wood chips. The special-shaped processing on the center machine can achieve the highest efficiency of use.
Carbide composite thick and thin helical cutter
Combined with the special thickness milling design of top-rotating cutting and bottom-rotating cutting, it is very suitable for high-speed solid wood processing. .
Carbide double-ended single-edged cutting knife A
Common scope: commonly used in handicrafts, solid wood beds, solid wood cutting, sofa inner frame, MDF and other applications.
Carbide three-blade cutting knife
Unique three-edged design, each cutting edge has a chisel edge for rapid chip removal and chip breaking, reducing friction and heat generation, faster chip removal and higher efficiency. Imported alloy bars are used, which have strong toughness and ensure the sharpness of the blade for a long time.
Carbide double-ended single-edged cutting knife B
Common scope: commonly used in handicrafts, solid wood beds, solid wood cutting, sofa inner frame, MDF and other applications.